Review: FIMI Palm 2 Pro Gimbal Camera with 3 Axis and 4K Resolution

For those of you who don't want to be complicated with this easy-to-use camera, there is the Fimi Palm 2 Pro camera.

Inside there is a box containing the Fimi Palm 2 Pro and another contact below which contains a USB to USB-C cable and there is also a user manual and a warranty card sheet. At first glance, if we see it is exactly the same as the Femi Palm 2 with a touchscreen screen in the middle and above it there is a camera flash button below there is also a Power joystick button which is also a starter button and a record button if we look at the left side there is a Femi logo perched adorning the body layer.

On the right side there is also a micro sd card slot with a microphone behind it, there is a 3.5 mm audio jack then below it there is also a PSI with a 4 inch screw hole. Exactly the same as the femi palm 2. Pro camera and the latest sensor from sony cmos.

We can adjust the settings with all touchscreens starting from the resolution and fps then turning HDR on and off so that the quality of the video capture can also be adjusted starting from

• Natural
• F-Log
• Bright

We can also adjust the microphone by setting the soundboard through the mic, which we can set on the camera section, we give a 12 megapixel camera with an Angle of 128 degrees, but the sensor presented is larger, namely 1/2" with a larger aperture opening, namely F2. .2 based on this alone means that we can take videos at night more clearly. The battery is 2600mah and can be used to record 4K 30fps for 160 minutes.